Make sure that Bluetooth™ is on in your phone and that it's visible to other devices (please refer to your phone's User Guide to do this). Make sure that the phone is close to the Bluetooth™ Handsfree (max. 20 cm).
Make sure that the Bluetooth™ Handsfree is turned off.
On the handsfree, press and hold the On/Off key for at least five seconds until the pairing icon (two circling arrows) is visible in the display. The Bluetooth™ Handsfree is now in pairing mode.
If your phone supports auto-pairing, all you have to do is press Yes when the question 'Add device' appears in the phone. If not, please consult your phone's user guide on how to add a Bluetooth™ device.
You may need to enter a passcode before you can add the device. The default passcode is 0000.
If you use the device in multipoint mode, the standby time is reduced. To increase the standby time, always remember to unpair a device you're no longer using. To unpair a device, you must reset the headset and re-pair the devices you want to use.
To reset the headset to the default settings:
Switch the headset off.
Press and hold down the on/off key until the display shows the pairing icon.
Follow the pairing instructions to pair the devices you want to use.
This is a limitation of Bluetooth™ stereo audio streaming and not an issue specific to the headset. The streaming service takes up most of the data bandwidth, which means that access by any other service (e.g. data communication with the PC) will interrupt the audio stream.
Yes it is. Just select a contact and press the Call handling key to dial. If the contact has more than one number, scroll among the numbers with the volume keys until you find the one you want and then press the call Handling key to dial it.
Make sure that the Bluetooth Handsfree is off, and press and hold the On/Off key for 5 seconds. You hear a long beep after the first signal.
Press and hold the On/Off key and the call handling key simultaneously for 5 seconds. The Bluetooth Handsfree is now switched off. A reset is then performed.
Press and hold the Menu key until the menu appears.
Use the Volume keys to switch between options and find the Contacts icon. Press the Music key to enter Contacts.
Scroll in the alphabetical list with the Volume keys and press the Music key to select the first letter of the contact.
Select a contact and press the Call handling key to dial. If the contact has more than one number, scroll among the numbers with the Volume keys till you find the one you want and press the Call handling key to dial it.
To return to a previous menu level, press the Menu key.
Yes you can. When the Bluetooth Handsfree is active, anytime you want to mute the microphone, press both the (+) and (-)Volume key quickly, at the same time, to turn the microphone on and off.