• If the speakerphone behaves unexpectedly, do a hardware reset.
• If you want to restore the factory settings, do a master reset.

To do a hardware reset:

1. Make sure the speakerphone is turned on.
2. Press and hold down the action key until the speakerphone is turned off (after about 10 seconds).

To perform a master reset:

1. Make sure the speakerphone is turned on.
2. Press and hold down the - key and the + key simultaneously for two seconds. The Bluetooth™ indicator light flashes blue and a sound is heard.
3. Press and hold down the action key and the + key simultaneously for two seconds. A sound is heard, the speakerphone turns off and is reset to the factory default settings.

To pair the speakerphone with your phone:

1. In the phone: Turn on Bluetooth™ and turn on Bluetooth™ visibility.
2. Place the phone within range (10 m, 33 feet) of the speakerphone.
3. When the speakerphone is in pairing mode, the Bluetooth™ indicator light flashes blue and a sound is heard. If the speakerphone is not in pairing mode, you must enter pairing mode manually. Press and hold the - key and the + key simultaneously for two seconds.
4. In your phone: Follow the instructions in your phone user guide on how to add a new Bluetooth™ device. The passcode is "0000".
5. When the phone is paired and connected, the Bluetooth™ indicator light shows a steady blue light and a sound is heard.

Note: The speakerphone can only be paired with one phone at a time.

• Check if the Bluetooth™ function in the phone is on, and set to visible.
• Make sure that the phone is not connected with another Bluetooth™ device. The phone can only be connected with one device at a time.
• When in pairing mode, the speakerphone switches it self off if you do not pair it with the phone within 10 minutes. Try to pair the speakerphone again.
• Make sure that the speakerphone is charged and within range (10m, 33 feet).
• Repeat the pairing procedure.

Simply pair the speakerphone with a new phone. The speakerphone can only be paired with one phone at a time. If another phone is paired, the previous pairing information will be lost.

To reject a call:

• Press and hold down the action key for two seconds.

To turn the microphone on and off:

• Press the - key and the + key simultaneously. The status light flashes when the microphone is off. Repeat the procedure to turn on the microphone again.

To redial a contact:

• Press the action key twice.

If the car handsfree is turned off by pressing and holding the action key, an ongoing call will be transferred to the phone.

To transfer an ongoing call to the speakerphone:

• During a call on the phone, press the action key to transfer the sound to the speakerphone.

The speakerphone is automatically turned off when:

• The battery level is too low. Before it turns off, the status light turns red and you'll hear a short sound. Please charge the speakerphone.
• The paired phone has been out of range for 10 minutes.

Yes. For more information about voice dialling, see your phone user guide.