1. Make sure the speaker is charged and within range (about 10 m, possibly less if there are obstacles) of the phone.
2. Check your phone to make sure Bluetooth™ is turned on and that the speaker is among the connected devices. If necessary, repeat the pairing process to re-establish connection.
3. If there is still no connection, reset the speaker and pair it with the phone once again.

To use your phone and the speaker for listening to music, both devices must be turned on, within range of each other and correctly paired.

After checking this, simply start the media player in your phone, and the music will be streamed automatically to the speaker.

1. Turn on the speaker.
2. Press and hold the Bluetooth™ button to enter pairing mode. The LED indicator starts blinking green and red.
3. Press and hold the On/Off button and the Bluetooth™ button simultaneously.
4. The speaker automatically turns off when the reset is done.

1. Flashing green light: The speaker is on.
2. Green light fading to black: The speaker is turning off.
3. Alternating red and green flashes: The speaker is in pairing mode.
4. Pulsating (fading alternately between strong and weak) green light: The speaker is in music mode.
5. Flashing red light: The speaker is on and the battery needs charging.
6. Pulsating red light: The speaker is in music mode. The battery needs charging, or is being charged.
7. Steady red light: The speaker is off and the battery is being charged.
8. Steady green light: The speaker is off, the charger is connected but the battery is fully charged.

1. Turn on Bluetooth™ in your phone.
2. Turn on Bluetooth™ visibility in your phone. This makes your phone visible to other Bluetooth™ devices.
3. Turn on the Portable Bluetooth™ Speaker by pressing the On/Off button on the bottom of the speaker.
4. Press and hold the Bluetooth™ button on the bottom of the speaker until the LED indicator (located on the front of the speaker) starts flashing red and green.
5. Prepare your phone in accordance with its User guide's instructions for adding a Bluetooth™ device. When prompted, enter the speaker passcode (0000).